Contact Us

 


 


 


 



Nitrogen cabinet
Cart
Work table
Locker
Customized products
Lift cart
Frame
Clean Booth
Artwork


N Nitrogen Saving Cabinet > N4-02 Four-door wafer nitrogen cabinet

N4-02 Four-door wafer nitrogen cabinet

Four-door wafer nitrogen cabinet

Model Number: N4-02

Size: 1150x550x1770mm

Introduction to nitrogen cabinet

The nitrogen cabinet is continuously filled with nitrogen into the cabinet. Since nitrogen is an inert gas, it can reduce the humidity inside the cabinet and isolate various adverse effects caused by air on the objects. Therefore, it is commonly used to preserve high-precision products so that the product won’t oxidize and produce variations.

Main specification

Due to the need of maintaining the cabinet cleanliness and stability, the cabinet materials must be made of SUS304 and well-sealed. Therefore, the cabinet shall be fully welded and polished, and with various components that help to gas seal and make easy replacement in the future. The nitrogen inlet pipe also shall be specially designed to make the gas evenly ventilated. Since the storage habits and objects of different manufacturers are different, the cabinet size and configuration are all customized one.

Nitrogen control

Normally, a floating ball type flowmeter is used to control the nitrogen gas inflow, yet, an advanced temperature and humidity control system can be selected. The function is to display the temperature and humidity in the cabinet, and control the nitrogen consumption by humidity, used to achieve stable humidity in the cabinet and save nitrogen consumption.

產品描述

新鍏-氮氣櫃+濕度控制

・Fully welded seams

Maintains optimal airtightness indise the cabinet to increase its nitrogen stability. Achieve effective control and save on nitrogen consumption expenses.

・Unique design

Tightening the handles increases the nitrogen inside the cabinet.

・Silicone sealing

The edge of the door is sealed with high quality silicone strips.

・Equal gas distribution

Unique & well thought out design. The air pipe is speciallt designed to evenly distribute the gas inside the cabinet.

 

Accessory Equipment - Temperature and Humidity Controller

新鍏-氮氣櫃+濕度控制

Generally, a floating ball type flowmeter is used to control nitrogen gas influx. Hsin Wei offers an advanced temperature and humidity control system that can be used with the nitrogen saving cabinet. It displays the temperature and humidity of the cabinet. It uses nitrogen to control the humidity of the cabinet to keep the humidity level stable, and help save on nitrogen consumption.

CH-200 Temperature and Humidity Controller

  • The required humidity can be set according to the product category
  • 24 hour monitoring of the humidity changes in the cabinet
  • Can set the nitrogen flow to [stop] to save on nitrogen consumption
  • Temperature and humidity correction function
  • Open door warning: can set the delay time for an open door before starting the warning alert
Temperature sensor accuracy ±1.0 °C
Humidity sensor accuracy ±3.0%RH
Temperature sensor resolution 0.1 °C
Humidity sensor resolution 0.1%RH
External dimensions W220*D109*H136mm
Power supply 110V / 220V 2A
*Power switch, temperature and humidity sensor, inlet and outlet pipe fittings (customizable diameter), stop intake (upon reaching set humidity)
*Opening the door stops the nitrogen supply
 

More Nitrogen Saving Cabinet

N2-04 Two-door airtight storage nitrogen cabinet

N2-04 Two-door airtight storage nitrogen cabinet

N4-01 Nitrogen Cabinet with Temperature Humidity Control

N4-01 Nitrogen Cabinet with Temperature Humidity Control

N6-01 N2 Gas Nitrogen Dry Cabinet with Humidity Control

N6-01 N2 Gas Nitrogen Dry Cabinet with Humidity Control

CH-100 3rd Generation Humidity Controller by Nitrogen

CH-100 3rd Generation Humidity Controller by Nitrogen